ECOWAS - Flat-Rolled Steel in Coils - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingECOWAS: Flat-Rolled Steel Coils Market 2024
Flat-Rolled Steel Coils Exports
Exports in ECOWAS
In 2023, approx. X tons of flat-rolled steel in coils were exported in ECOWAS; increasing by X% against 2022 figures. Over the period under review, exports, however, continue to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2020 when exports increased by X%. The volume of export peaked at X tons in 2013; however, from 2014 to 2023, the exports remained at a lower figure.
In value terms, flat-rolled steel coils exports reached $X in 2023. In general, exports continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2020 with an increase of X%. Over the period under review, the exports reached the maximum in 2023 and are expected to retain growth in years to come.
Exports by Country
Senegal was the major exporting country with an export of about X tons, which reached X% of total exports. It was distantly followed by Ghana (X tons) and Benin (X tons), together constituting a X% share of total exports.
From 2012 to 2023, average annual rates of growth with regard to flat-rolled steel coils exports from Senegal stood at X%. At the same time, Ghana (X%) and Benin (X%) displayed positive paces of growth. Moreover, Ghana emerged as the fastest-growing exporter exported in ECOWAS, with a CAGR of X% from 2012-2023. From 2012 to 2023, the share of Senegal, Ghana and Benin increased by X, X and X percentage points, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Senegal ($X) remains the largest flat-rolled steel coils supplier in ECOWAS, comprising X% of total exports. The second position in the ranking was held by Ghana ($X), with a X% share of total exports.
In Senegal, flat-rolled steel coils exports expanded at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Ghana (X% per year) and Benin (X% per year).
Export Prices by Country
In 2023, the export price in ECOWAS amounted to $X per ton, reducing by X% against the previous year. In general, the export price, however, continues to indicate a slight increase. The most prominent rate of growth was recorded in 2022 when the export price increased by X% against the previous year. As a result, the export price attained the peak level of $X per ton, and then contracted in the following year.
Average prices varied noticeably amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Benin ($X per ton), while Senegal ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Benin (X%), while the other leaders experienced more modest paces of growth.
Flat-Rolled Steel Coils Imports
Imports in ECOWAS
In 2023, imports of flat-rolled steel in coils in ECOWAS dropped rapidly to X tons, with a decrease of X% against the previous year's figure. In general, imports continue to indicate a abrupt contraction. The most prominent rate of growth was recorded in 2014 with an increase of X%. As a result, imports attained the peak of X tons. From 2015 to 2023, the growth of imports failed to regain momentum.
In value terms, flat-rolled steel coils imports shrank sharply to $X in 2023. Overall, imports recorded a deep reduction. The most prominent rate of growth was recorded in 2018 when imports increased by X%. The level of import peaked at $X in 2014; however, from 2015 to 2023, imports remained at a lower figure.
Imports by Country
In 2023, Ghana (X tons), distantly followed by Nigeria (X tons), Cote d'Ivoire (X tons), Burkina Faso (X tons) and Senegal (X tons) were the main importers of flat-rolled steel in coils, together creating X% of total imports. Mali (X tons) and Guinea (X tons) held a little share of total imports.
From 2012 to 2023, the biggest increases were recorded for Ghana (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Ghana ($X), Nigeria ($X) and Cote d'Ivoire ($X) were the countries with the highest levels of imports in 2023, with a combined X% share of total imports.
In terms of the main importing countries, Cote d'Ivoire, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in ECOWAS stood at $X per ton in 2023, dropping by X% against the previous year. In general, the import price recorded a slight shrinkage. The growth pace was the most rapid in 2017 when the import price increased by X% against the previous year. Over the period under review, import prices hit record highs at $X per ton in 2012; however, from 2013 to 2023, import prices stood at a somewhat lower figure.
Average prices varied noticeably amongst the major importing countries. In 2023, major importing countries recorded the following prices: in Guinea ($X per ton) and Senegal ($X per ton), while Burkina Faso ($X per ton) and Ghana ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Guinea (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the flat-rolled steel coils market in ECOWAS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103310 - Hot-rolled flat products in coil for rerolling of a width of .600 mm or more, of stainless steel
- Prodcom 24103320 - Other hot-rolled flat products in coil of a width of .600 mm or more, of stainless steel
- Prodcom 24103410 - Hot-rolled flat products in coil for rerolling of a width of less than .600 mm, of stainless steel
- Prodcom 24103420 - Other hot-rolled flat products in coil of a width of less than .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24104110 - Uncoated cold-rolled sheet, plate and strip of a width . .600 mm, of steel other than stainless steel
- Prodcom 24104130 - Electrical sheet and strip not finally annealed of a width of .600 mm or more
- Prodcom 24104150 - Electrical sheet and strip, grain non-oriented of a width . .600 mm
Country coverage:
- Benin
- Burkina Faso
- Cabo Verde
- Cote d'Ivoire
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Niger
- Nigeria
- Senegal
- Sierra Leone
- Togo
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ECOWAS, split by region and country
- Trade (exports and imports) in ECOWAS
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Benin
- Burkina Faso
- Cabo Verde
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Liberia
- Mali
- Niger
- Nigeria
- Senegal
- Sierra Leone
- Togo
- Cote d'Ivoire
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the flat-rolled steel coils market in Asia.
This report provides an in-depth analysis of the flat-rolled steel coils market in the U.S..
This report provides an in-depth analysis of the flat-rolled steel coils market in China.
This report provides an in-depth analysis of the flat-rolled steel coils market in the EU.
This report provides an in-depth analysis of the global flat-rolled steel coils market.
- Flat-Rolled Steel Coils Market
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market