World - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingGlobal Tap And Valve Market 2024
Tap And Valve Market Size
The global tap and valve market expanded modestly to $X in 2023, rising by X% against the previous year. The market value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern remained relatively stable, with somewhat noticeable fluctuations throughout the analyzed period. Over the period under review, the global market reached the maximum level at $X in 2021; however, from 2022 to 2023, consumption failed to regain momentum.
Tap And Valve Production
In value terms, tap and valve production amounted to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern remained relatively stable, with only minor fluctuations being observed in certain years. The pace of growth appeared the most rapid in 2018 when the production volume increased by X%. Over the period under review, global production attained the peak level at $X in 2021; however, from 2022 to 2023, production failed to regain momentum.
Tap And Valve Exports
Exports
After two years of growth, shipments abroad of taps, cocks, valves and similar appliances decreased by X% to X tons in 2023. The total export volume increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained consistent, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2015 with an increase of X% against the previous year. The global exports peaked at X tons in 2022, and then contracted modestly in the following year.
In value terms, tap and valve exports amounted to $X in 2023. The total export value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. The global exports peaked in 2023 and are expected to retain growth in the immediate term.
Exports by Country
China represented the major exporter of taps, cocks, valves and similar appliances in the world, with the volume of exports accounting for X tons, which was near X% of total exports in 2023. It was distantly followed by Italy (X tons) and Germany (X tons), together achieving a X% share of total exports. Mexico (X tons), Japan (X tons), Spain (X tons), India (X tons), South Korea (X tons), Poland (X tons), Taiwan (Chinese) (X tons) and Turkey (X tons) followed a long way behind the leaders.
From 2012 to 2023, average annual rates of growth with regard to tap and valve exports from China stood at X%. At the same time, Poland (X%), Turkey (X%), Mexico (X%), India (X%), Taiwan (Chinese) (X%) and Spain (X%) displayed positive paces of growth. Moreover, Poland emerged as the fastest-growing exporter exported in the world, with a CAGR of X% from 2012-2023. Germany experienced a relatively flat trend pattern. By contrast, Italy (X%), Japan (X%) and South Korea (X%) illustrated a downward trend over the same period. From 2012 to 2023, the share of China increased by X percentage points. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X), Germany ($X) and Italy ($X) were the countries with the highest levels of exports in 2023, together comprising X% of global exports. Japan, Mexico, Poland, South Korea, Spain, India, Taiwan (Chinese) and Turkey lagged somewhat behind, together comprising a further X%.
In terms of the main exporting countries, Poland, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other global leaders experienced more modest paces of growth.
Export Prices by Country
The average tap and valve export price stood at $X per ton in 2023, rising by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. The growth pace was the most rapid in 2014 an increase of X% against the previous year. As a result, the export price attained the peak level of $X per ton. From 2015 to 2023, the average export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Germany ($X per ton), while China ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Poland (X%), while the other global leaders experienced more modest paces of growth.
Tap And Valve Imports
Imports
In 2023, after three years of growth, there was significant decline in overseas purchases of taps, cocks, valves and similar appliances, when their volume decreased by X% to X tons. Over the period under review, imports, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2020 with an increase of X%. Over the period under review, global imports hit record highs at X tons in 2022, and then contracted in the following year.
In value terms, tap and valve imports amounted to $X in 2023. The total import value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained relatively stable, with only minor fluctuations being observed throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Over the period under review, global imports reached the peak figure in 2023 and are likely to see gradual growth in years to come.
Imports by Country
In 2023, the United States (X tons), followed by Mexico (X tons), Germany (X tons) and India (X tons) represented the major importers of taps, cocks, valves and similar appliances, together comprising X% of total imports. The following importers - Russia (X tons), China (X tons), France (X tons), Nigeria (X tons), the UK (X tons), Italy (X tons), Spain (X tons), Canada (X tons) and the United Arab Emirates (X tons) - together made up X% of total imports.
From 2012 to 2023, the biggest increases were recorded for India (with a CAGR of X%), while purchases for the other global leaders experienced more modest paces of growth.
In value terms, the United States ($X), China ($X) and Germany ($X) appeared to be the countries with the highest levels of imports in 2023, with a combined X% share of global imports. France, Canada, the UK, Mexico, Italy, Russia, India, Spain, the United Arab Emirates and Nigeria lagged somewhat behind, together comprising a further X%.
Among the main importing countries, India, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other global leaders experienced more modest paces of growth.
Import Prices by Country
The average tap and valve import price stood at $X per ton in 2023, with an increase of X% against the previous year. Over the last eleven years, it increased at an average annual rate of X%. As a result, import price attained the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per ton), while Nigeria ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the United States (X%), while the other global leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the global tap and valve market. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:
- USA
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
+ the largest producing countries
Data coverage:
- Global market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Global production, split by region and country
- Global trade (exports and imports)
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- United States
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.